 |
|
|
Lots of Hydrasieve units are serving for water pollution control, recovery of Valuable solids and separation/dewatering/concentration of solids.
Construction and Operation of HYDRASIEVE SCREENS
The slurry is fed into the headbox. The incoming fluid flows over the weir above
the screen area and the velocity is accelerated. Any turbulence in the flow is
reduced by a hinged baffle as the liquid approaches the screen. On the first
slope of the screen (which has three slopes of different angle), most free fluid
is stripped. On the second slope, more fluid is removed and solids roll downward
on the screen. On the final slope, solids decelerate for simple drainage action,
and are moved off the flat surface being displaced by oncoming material. Stripped
water passes through the screen and is discharged from the water outlet.
For a higher dewatering efficiency, the patented screen of HYDRASIEVE uses the wedge wires which have a wedge-shaped section. The screen wires are curved so as to prevent clogging of the screen.
|
 |
 |
Duct-in Type |
In the ionair system, contaminated or polluted indoor
or extracted air will be demand control enriched with positive and negative
oxygen ions. Optimum discharging ensures a stable formation of active oxygen
molecule clusters. Fresh and Clean Air with Reduction in airborne germs,
neutralization of odors and reduction of harmful vapors are formed without
UV rays or the addition of chemicals.
|
|
 |
 |
Collecting Equipment for Welding Splatter Particle
| • |
Using vacuum blower volume 30 m3/min, the exhaust can be done at far from welding point. |
| • |
By swing arm, the vacuum point can
be changed. |
|
|
 |
 |
Table Type Exhauster for Grinder machine
| • |
Grinding Powder can be free from
rebound. |
| • |
Collecting Powder is accumulated
at under drawer pocket. |
|
|
 |
 |
| • |
The exhaust can be done at big area
of 10 x 15 m floor, and density control is available. (Free from
mask) |
|
|
