| For Resin : Reclaiming Extruder |
 |
Single Screw Extruder with one(1) Vent
| 1) |
Stable extrusion of ultra-low
bulk density materials is possible under combination of reducing
single screw diameter with one(1) vent zone. |
| 2) |
Because the lager diameter
screw at the feeding zone has a function as the in-line compactor
and pre-heater, stable feeding of materials is possible without
any bridging. |
| 3) |
The smaller diameter screw
with special configuration at the melt-extruding zone enables
molten polymer to mix,degas and extrude under the low shear
rate at the high screw revolution. |
| 4) |
Therefore, the low temperature
extrusion, the minimum physical property change (example
: IV) and the operation at the low cost shall
be realized. |
| 5) |
The small diameter screw for
melt extrusion shall be pull out for easy cleaning and the
cylinder temperature shall be controlled by electric heating
and blower cooling system. |
| 6) |
This special single screw extruder
shall be designed at the excellent cost performance with
strong structure as compared with twin screw extruder. |
|
 |
 |
For Bulk Material : Vacuum Molding Extruder
Combined machine for kneading and extrusion.
| • |
Reducing processes and space. |
| • |
By pressurization of long screw at extrusion
part, high dense and uniformly molding can be realized. |
| • |
Kneading power can be adjusted at the paddle
of kneading part. |
|
|
 |
For Bulk Material : Ceramic Sheet Molding
PD (Pipe Doctor) Coater : The coating thickness of ceramic such as
alumina green sheet or ceramic capacitor film can be automatically
controlled by linking setting of the PD/film-roll gap with the thickness
meter at the exit of the dryer. |
|
 |
For
Bulk Material : Press Molding
By the precision control of pressure and molding speed, any powder can be molded
with high efficiency. And any size molding die can be supplied.
Adaptation of molding speed with molding shape.
| • |
Load / time curve can be controlled by inverter. |
| • |
Molding density can be equalized by the precision
control system. |
| • |
Small machine size by using super-high pressure hydraulic
pump unit. |
| • |
Full automatic molding can be adapted from powder
feeding to product produce. |
|
